Driveway cleaning in Charleston, SC restores concrete, pavers and stone that shade, pollen and tree debris have darkened. We clean evenly, without the stripes or etched lines a careless wand can leave behind.
A driveway is often the first thing a guest notices, and in the Lowcountry it rarely stays bright for long. Mildew darkens concrete in the shade of live oaks, fallen leaves leave orange-brown tannin prints, pine straw and Spanish moss collect along the edges, and sprinklers drawing on well water can leave rust-colored streaks across the pavement.
Flat concrete — driveways, sidewalks, garage aprons and pool surrounds — is cleaned with a rotary surface cleaner, which spins pressurized water evenly beneath a hood. That avoids the zebra stripes and etched lines a handheld wand can leave, and it keeps spray off your car, siding and plantings. Edges, steps and corners are then detailed by hand.
Pavers, bluestone, brick walkways and travertine call for more restraint. Too much pressure can wash out joint sand, chip edges or loosen individual stones. We clean these at controlled pressure and let you know if any joints look as though they need fresh sand afterward.
Hardscape cleaning is part of our pressure washing service in Charleston, and many homeowners pair it with a house wash or deck and patio cleaning so the entire property is finished on the same day.
We clean every horizontal surface around the house, from the curb to the back steps.
Surface cleaning lifts mildew, algae, tire marks and everyday grime for an even finish from edge to edge. We pre-treat oil drips and other stubborn spots where possible, and we'll be candid about stains that have soaked in too deeply to remove completely.
Front walks, side paths and the public sidewalk along your property gather pollen, leaf stains and algae that turn slick in wet weather. Cleaning them restores both their appearance and sure footing for family and guests, particularly on shaded paths that rarely dry out.
Concrete pavers, brick pavers, bluestone and travertine are cleaned at controlled pressure to protect joints and edges. We rinse loosened sand away carefully and point out any sections where the joint sand may need to be replaced.
Pool surrounds and ground-level patios grow algae quickly in the humidity and can become slippery underfoot. We clean them thoroughly while keeping debris and runoff out of the pool and away from screened enclosures and outdoor furniture.
Learn moreThe apron in front of the garage and any parking pads beside the house catch tire marks and drips first. We include them in the driveway cleaning so the whole approach to your home has one consistent, clean finish.
Free estimates · Licensed & insured · Trusted across the Lowcountry since 2008
We ask that vehicles be moved off the driveway, and we blow off leaves, pine straw and loose debris before any water touches the surface.
Oil drips, organic staining and heavy growth receive targeted treatment first, so they respond better once the main cleaning begins.
A rotary surface cleaner works across flat concrete in overlapping passes for a uniform finish, while pavers and stone are cleaned at lower pressure.
Edges, joints, steps and nearby siding are rinsed clean, and the driveway is ready to use as soon as it has dried.
Uneven cleaning is easy to spot from the street: light and dark bands, wand marks, etched lines. It happens when the wrong tool or too much pressure is used on concrete. Our crews rely on surface cleaners and patient technique, so the result looks uniform and the surface isn't worn down in the process.
Controlled pressure keeps joint sand, paver edges and natural stone intact while still lifting the growth that makes them dark and slippery.
Surface cleaners contain the spray, so your car, siding, screens and garden beds aren't left coated in grit when the work is finished.
Driveways look their best when the house above them is clean too, and we can handle both in a single, coordinated visit.
Often we can lighten them considerably. Fresh oil and transmission drips respond best to pre-treatment and cleaning. Older stains that have soaked deep into the concrete may fade but not disappear entirely, because the oil sits below the surface. We'll look at the stain during the estimate and tell you honestly what to expect.
Not with the right technique. Pavers and the sand between them can be disturbed by excessive pressure, so we clean them at controlled pressure and keep the nozzle at a safe distance. Some joint sand may loosen during cleaning; if the joints look low afterward, we'll let you know so they can be topped up.
In the Lowcountry, rust-colored stains often come from irrigation systems drawing iron-rich well water, from fertilizer granules, or from metal furniture and planters. Fallen leaves leave brownish tannin stains as well. These respond differently than mildew does, so tell us what you suspect is causing them and we'll assess them at the estimate.
You can walk on concrete as soon as we finish, and drive on it once the surface has dried, which is often a few hours on a warm, sunny day. Shaded driveways can take longer to dry. If you need your car for an early appointment, park it on the street before we arrive.
Most driveways look their best with a cleaning every year or two. Shaded driveways under live oaks, those near the marsh and those hit by sprinkler overspray tend to darken faster. Many homeowners schedule driveway cleaning alongside their annual house wash, which is efficient and leaves the whole exterior looking consistent.
For routine mildew and dirt, the rinse water from concrete cleaning is mostly plain water and drains away much like a heavy rain. When cleaning solutions or degreasers are needed, we apply them sparingly, rinse thoroughly and direct runoff so it doesn't pool on the lawn or soak into garden beds.
Call (843) 926-6554 or request a free estimate. Let us know which surfaces you'd like cleaned — driveway, walkways, pavers or pool deck.
